U.S. Demand For Refractories To Reach $2.8 Billion Through 2003

Photo courtesy of Thermal Ceramics, Augusta, Ga.
Industry depends on refractories for profitable mass production of all essential materials, including iron, steel, aluminum, copper, brass, glass, cement, chemicals and petrochemicals, just to name a few. The most current annual figures (for 1998), released in March 2000 by the U.S. Department of Commerce, showed a total refractory production of 3.66 million metric tons, with a value of $2.379 billion. The 1998 total production (tons) was 2.2% more than 1997, and the total market value ($) was 7% less. For the first time since 1984, the average price per ton decreased-to $650 from $716 in 1997. Fired bricks and shapes (clay and non-clay) accounted for 54% of the 1998 market value, compared with 53% in 1997.

Table 1. Refractory products demand ($ millions).

According to a recent study from The Freedonia Group, Inc., Cleveland, Ohio, demand for refractory products in the United States is projected to increase 2.5% per year through 2003 to $2.8 billion, a deceleration from the mid/latter 1990s' pace. Much of the slowdown will reflect cyclical factors, in particular some moderation in new capital investment following several years of healthy gains. This will impact most of the major refractory-using markets, including ceramics and glass, minerals processing, iron and steel, and nonferrous metals. Advances in manufacturing processes have occurred in most of these industries, resulting in less intensive use of refractories per unit of output produced (for example, electric arc furnace steelmaking). Refractory suppliers have actually reinforced this trend by developing products offering superior performance and increased longevity, which require less frequent replacement and maintenance.

Prospects are better in the petroleum and chemicals market, where capital spending is expected to pick up as global demand firms, stimulating refractory purchases. In addition, less traditional refractory markets such as waste-to-energy and heat recovery, electronics and medical equipment hold favorable prospects, but the small size of these markets will limit their contribution to overall growth.

Shipments of refractory products from U.S. facilities will increase 2.5% annually through 2003 to $2.9 billion, says the Freedonia study, just about matching growth in demand and resulting in a flattening out of the U.S. trade surplus. On balance, sustained competition from foreign producers-based both in developed and developing nations-will be offset by somewhat improved export prospects in many countries as the global economic crisis continues to recede. In volume terms, U.S. refractory shipments will rise 0.5% per year through 2003 to 3.8 million tons, a significant deceleration from the recent historical performance.

Among the major refractory forms, monolithic castables and preformed shapes hold the best growth prospects, benefiting from superior performance and design flexibility relative to other forms. Zircon/zirconia, extra-high alumina, silicon carbide and other more specialized refractory materials offering superior performance in key applications will exhibit favorable gains. Cost-effective refractory materials such as silica, ceramic fibers, high-alumina and insulating types will register above-average growth as well.

Over 100 companies manufacture refractory products in the U.S., but the industry has been consolidating rapidly in recent years in the face of highly mature markets and intensely competitive business conditions. In 1999, Alpine Group sold its Premier Refractories unit to Cookson Group of the U.K.; and Global Industrial Technologies (parent of Harbison-Walker Refractories), was acquired by RHI AG (formerly Radex Heraklith Industriebeteiligungs) of Austria. RHI was already a major player in the U.S. refractory industry through VRD-Americas and its North American Refractories Co., or NARCO, subsidiary. Other leading refractory producers include Allied Mineral Products, Baker Refractories, Minerals Technologies (via MINTEQ), Morgan Crucible, National Refractories Holding Co., Resco Products and Compagnie de Saint-Gobain. The refractories industry worldwide has changed drastically with various high-profile corporate buyouts/mergers resulting in plant closings and sales, brand eliminations, layoffs, retirements, and many personnel changes (within and between companies). Additionally, experienced refractories specialists at many companies are approaching retirement age. A period of transition and adjustment is to be expected.

Refractory practices have also changed, with increased lining life in most applications. Basic oxygen steelmaking furnace linings have exceeded 20,000 heats. In the past, glass furnaces were repaired every four years, which was extended to every 10 years, and is now every 13 years-with little or no preventative maintenance. These trends will continue into the future as refractory manufacturing technology becomes more advanced.

Editor's note:

The above information was compiled from information submitted by Dr. Charles Semler (Semler Materials Services, Tucson, Ariz.), and from the Freedonia Group study, titled Refractories. The entire Freedonia Group study (published September 1999, 177 pages) is available for $3,500 from The Freedonia Group, Inc., 767 Beta Drive, Cleveland, OH 44143-2326. For further details, contact Corinne Gangloff at (440) 684-9600, fax (440) 646-0484 or e-mail pr@freedoniagroup.com. Full text is also available online through commercial database companies and the www.freedoniagroup.com website.


Did you enjoy this article? Click here to subscribe to Ceramic Industry Magazine.

You must login or register in order to post a comment.



Image Galleries

October 2014 Issue Highlights

Our October 2014 issue is now available!

Posted: January 29, 2015


Ceramics Expo podcast
Editor Susan Sutton discusses the upcoming Ceramics Expo with event director Adam Moore.
More Podcasts

Ceramic Industry Magazine

CI March 2015 cover

2015 March

We're focusing on thermal processes and decorating in this issue. Check it out!

Table Of Contents Subscribe

Daily News

We know where you find the latest ceramic industry news (ahem), but where do you catch up on the rest of your daily news?
View Results Poll Archive


M:\General Shared\__AEC Store Katie Z\AEC Store\Images\Ceramics Industry\handbook of advanced ceramics.gif
Handbook of Advanced Ceramics Machining

Ceramics, with their unique properties and diverse applications, hold the potential to revolutionize many industries, including automotive and semiconductors.

More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.


facebook_40px twitter_40px  youtube_40pxlinkedin_40google+ icon 40px


CI Data Book July 2012

Ceramic Industry's Directories including Components, Equipment Digest, Services, Data Book & Buyers Guide, Materials Handbook and much more!