Ceramic Industry News

Acimac Reports 2009 Results for the Italian Ceramic Machinery Market

January 19, 2010
/ Print / Reprints /
/ Text Size+

Preliminary analysis conducted by the Acimac Studies Centre has confirmed that 2009 was an annus horribilis for the Italian ceramic and heavy clay machinery manufacturing sector. According to the initial results of surveys, the sector’s turnover fell by around 29.2% from the 2008 level of 1,825.5 million euro ($2,649.2 million). During the course of the year, almost all companies in the sector reported a fall in turnover with the sole exception of those that operate in certain niche markets, such as technologies for the optimization of combustion and energy savings, or those that are market leaders in the few markets that have been only marginally affected by the global crisis.

The worst-hit companies are small businesses with turnovers of below 5 million euro ($7 million). These companies are still the majority in the sector in numerical terms, though they account for just 10% of total turnover. Small businesses have experienced falls in turnover of more than 32%, in line with the drop in production reported by their client ceramic companies in Italy (where they generate virtually all of their business). For this reason, the micro-companies belonging to Acimac are the most pessimistic regarding the outlook for 2010. These are also the companies that have made the greatest use of social shock-absorbers and are expecting to continue to use them next year.

Larger companies have reported slightly less negative results. These companies are more active in international markets and are therefore less dependent on the performance of individual markets. For this and other reasons, their forecasts for 2010 are cautiously optimistic. Signs of recovery began to appear during the last few months of 2009 and provide hope that the sector will remain buoyant.

The employment situation in the Italian ceramic and heavy clay machinery sector appears to be less alarming than the national average in the manufacturing goods sector. The majority of companies have made limited use of the available social shock-absorbers. On average, the wages guarantee fund was adopted for around three months and only affected production personnel. The forecasts for 2010 are more cautious, although the majority of surveyed companies confirm that they will not need to resort to the wages guarantee fund unless market conditions worsen.

This situation is partly a result of the organizational structure of companies in the ceramic machinery sector, which have always had a very lean personnel structure and make significant use of production outsourcing. Although there are no official data, the Acimac Studies Centre believes that the employment situation is certainly more difficult for its member companies’ suppliers and sub-suppliers.

The Acimac Studies Centre has confirmed its moderately positive forecasts for 2010. Encouraging, if unconfirmed, signs are arriving from several foreign markets, particularly North Africa; Turkey; and South America, where Brazil, one of the world’s largest manufacturing countries, appears to have resumed growth. On the other hand, the European market is expected to remain highly stagnant and continues to cause serious concern.

Visit www.acimac.it for additional information.


Did you enjoy this article? Click here to subscribe to Ceramic Industry Magazine.

You must login or register in order to post a comment.



Image Galleries

September 2014 Issue Highlights

Our September 2014 issue is now available!

Posted: December 15, 2014


Manufacturing Day 2014

Manufacturing Day organizers share their insights with Managing Editor Kelsey Seidler.

More Podcasts

Ceramic Industry Magazine

CI January 2015 cover

2015 January

It's our annual Materials Handbook issue, with the ever-popular "Raw & Manufactured Materials Overview" article! Check it out today.

Table Of Contents Subscribe

Personal Smartphones

Do you use your personal smartphone or other device to complete tasks for your job?
View Results Poll Archive


M:\General Shared\__AEC Store Katie Z\AEC Store\Images\Ceramics Industry\handbook of advanced ceramics.gif
Handbook of Advanced Ceramics Machining

Ceramics, with their unique properties and diverse applications, hold the potential to revolutionize many industries, including automotive and semiconductors.

More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.


facebook_40px twitter_40px  youtube_40pxlinkedin_40google+ icon 40px


CI Data Book July 2012

Ceramic Industry's Directories including Components, Equipment Digest, Services, Data Book & Buyers Guide, Materials Handbook and much more!