MoreA full line of leak-proof, one-way vacuum check valves that are designed to optimize vacuum pump performance in a wide range of material handling systems is available from Anver Corp. Anver CheckVac™ valves are made from a seamless, one-piece aluminum body and feature a plastic valve element with a specially tempered stainless steel spring and an O-ring seal.
Unlike pressure check valves, which have a stiffer spring and were designed for compressed air, this vacuum system check valve provides up to a 4x better flow rate for optimum performance. Eliminating the major source of flow restriction in most vacuum systems, Anver CheckVac™ valves’ increased flow rate permits the use of smaller vacuum pumps in many applications. Offering low cracking pressure and a smooth bore, these leak-proof check valves come in 1/4 through 2 in. NPT sizes and are spring-loaded to operate in any orientation.
For more information, call (800) 654-3500, fax (978) 568-1570, e-mail mlaycox@anver.com or visit www.anver.com.
Unlike pressure check valves, which have a stiffer spring and were designed for compressed air, this vacuum system check valve provides up to a 4x better flow rate for optimum performance. Eliminating the major source of flow restriction in most vacuum systems, Anver CheckVac™ valves’ increased flow rate permits the use of smaller vacuum pumps in many applications. Offering low cracking pressure and a smooth bore, these leak-proof check valves come in 1/4 through 2 in. NPT sizes and are spring-loaded to operate in any orientation.
For more information, call (800) 654-3500, fax (978) 568-1570, e-mail mlaycox@anver.com or visit www.anver.com.
With access to over one million professionals and more than 60 industry-specific publications,
