- THE MAGAZINE
- NEW PRODUCTS
- CI Advanced Microsite
- CI Top 10
- Raw & Manufactured Materials Overview
- Classifieds & Services Marketplace
- Product & Literature Showcases
- Virtual Supplier Brochures
- Market Trends
- Material Properties Charts
- List Rental
- Custom Content & Marketing Services
According to “Molybdenum: Market Outlook to 2014” (10th Edition, 2010) from Roskill Information Services, cutbacks by major producers, combined with stockpiling in China, resulted in a tightening of supply that caused prices to spike in mid-2009. Between July 2009 and August 2009, prices for both molybdic oxide and ferromolybdenum almost doubled, only to drop by 50% in the following two months.
From November 2009, in line with the general trend in commodity prices, molybdenum prices have increased, reaching $15/lb by January 2010, an increase of almost 50%. Nevertheless, with demand expected to rebound in 2010, prices could consolidate at current levels.
In 2009, molybdenum consumption is estimated to have declined by as much as 9% as end-users curtailed their requirements. Although consumption has declined on a global level, emerging markets such as China have seen demand continue to increase in 2009. Chinese consumption is estimated to have risen by around 5% in 2009.
Chinese consumption will continue to outstrip growth in the rest of the world, with an annual average rate of 9% for the next five years, compared to accumulated growth of 2% per year in the developed markets of Europe, the U.S. and Japan.
Molybdenum is consumed mainly as oxide or ferromolybdenum in stainless and alloy steels, products for which demand has fallen significantly in the global downturn. Production of stainless steel, which accounts for around 25% of all molybdenum consumption, has declined sharply over the last two years. In 2008, output fell by 7% year-on-year, while the first three quarters of 2009 saw production of crude stainless steel decline by around 15%, year-on-year.
The fall in production of stainless steel, however, has only taken place in developed economies. Emerging markets such as China and India have seen domestic output continue to rise. The first three quarters of 2009 saw Chinese production up by almost 20% year-on-year; for the whole year, China is forecast to produce 8-9 Mt. However, 2010 is expected to see an increase in global demand and production as world GDP recovers. World production of crude stainless steel is forecast to increase by around 8% in 2010. After 2010, demand growth is expected to average 4% per year as the various end-uses for molybdenum consume ever-larger volumes.
The drive to reduce carbon dioxide emissions from coal-fired power stations will require plants running at higher temperatures, resulting in greater demand for high-end molybdenum-bearing steels. The energy market will play an important role in the future, as the growth in nuclear power stations, along with drilling for oil and gas in harsher environments, drives demand for molybdenum-containing steels.
In response to a large withdrawal of demand from the market, molybdenum producers responded with savage cuts. In 2009, global mined molybdenum output is estimated to have declined by 12%, following annual average growth of 5% for the period 2000 to 2008. Surpluses in 2008 and 2009 have been absorbed by stockpiling, mainly in China. In the longer-term, molybdenum demand is expected to recover and the market may move into deficit by 2014.
With the decline in prices in late 2008, many new mining projects were slowed or suspended. As there are some 40 molybdenum mine projects with combined capacity of about 170 kt per year at some level of feasibility assessment, longer-term supply appears to be assured. The only new roasting plant outside China that is likely to be constructed in the short- to medium-term is that by Molymet at Mejillones in Chile, which will raise world capacity to more than 270 kt per year. This is more than sufficient on a global basis, but there still may be localized shortages of roasting capacity.
In February 2010, the London Metal Exchange (LME) will commence futures trading of molybdenum as part of its move to list minor metals on its exchange. The plan to turn molybdenum into an exchange-traded commodity has come with mixed reviews. Many producers and consumers have voiced concerns that prices will become more volatile as a result, while others have welcomed the news. So far, Molymet is the only company to register its brands of molybdic oxide, although Jinduicheng Molybdenum, China Molybdenum, and Kwangyang Ferroalloy have also applied for registration.
Regardless of the platform used, molybdenum prices are expected to remain volatile while following an upward trend. In 2010, prices for oxide are forecast to average $17/lb, rising to above $20/lb in 2011, as strong demand allows producers to increase prices. Looking forward, a deficit could appear in the market by 2014, taking prices to $40/lb.
For additional details, call (44) 208944-0066, fax (44) 208947-9568, e-mail email@example.com or visit www.roskill.co.uk.