- THE MAGAZINE
The new coated cutting material (ISO HC-P15) is suitable for finish-turning, in one step at moderate feed rates, workpieces with small to medium allowances of up to around 1.5 mm. These are ideal near-net shape preconditions. SC 7035 largely overlaps the application range of uncoated Cermets while reaching out further toward greater wear resistance. With the possibility of dry machining and no need for lubricants while cutting, advantages are reported to be both ecological and economical.
Available in all the important basic insert geometries, the -MQ chip breaker provides an addition to the existing range of chip breakers for negative insert geometries -SP, -MB, and -MK, and ensures reliable chip control and automation-compatible chip breaking for feeds of 0.10 to 0.30 mm and cutting depths of 0.4 to 1.5 mm.