MoreLucifer Furnaces Inc. has designed a large heat treating box furnace for a leading provider in the aerospace industry. The 20 x 20 x 40 in. unit will be used in the manufacture of engine parts. The three-zone furnace meets the AMS2750 specification required by NADCAP.
Constructed with an angle iron steel frame and heavy-gauge sheet steel facing welded to form a rigid unit, the furnace heats to 2000°F. With a three-zone master/slave temperature control system and over-temperature safety controls linked to a computer interface, reduced cooling time is achieved through a fresh air damper system. Power (54 kW) is generated through heavy-gauge wire heating elements in removable radiant panels located in the door, side walls and rear wall of the furnace.
For additional details, visit www.luciferfurnaces.com.
Constructed with an angle iron steel frame and heavy-gauge sheet steel facing welded to form a rigid unit, the furnace heats to 2000°F. With a three-zone master/slave temperature control system and over-temperature safety controls linked to a computer interface, reduced cooling time is achieved through a fresh air damper system. Power (54 kW) is generated through heavy-gauge wire heating elements in removable radiant panels located in the door, side walls and rear wall of the furnace.
For additional details, visit www.luciferfurnaces.com.
With access to over one million professionals and more than 60 industry-specific publications,
