After the kiln is removed from the microwave, the glass takes about an hour to cool to room temperature. Because the kiln fires so rapidly, glass pieces should be limited in size to two layers of 1 1/2 x 1 1/2 in. or smaller. Larger sizes or additional layers of glass must be pre-heated for five minutes at a 50% microwave power setting.
“Firing times may vary even within the same microwave oven,” said Arnold Howard, spokesman for Paragon. “For this reason, visually check the glass a minute or two before it is done. Then continue the firing. The MagicFuse is easy to fire when you visually check the glass and keep firing records.”
The MagicFuse has no elements; the microwave oven supplies the heat. The kiln comes with 6 1/2 in. ceramic posts, glass separator and a 15-page instruction manual.
For more information, call (800) 876-4328 or (972) 288-7557, e-mail info@paragonweb.com, or visit www.paragonweb.com.


More

With access to over one million professionals and more than 60 industry-specific publications,




