Cerama-Dip(TM) 538-BL from Aremco Products, Inc. is a single part, water-based, inorganic ceramic coating system used to electrically isolate high power resistors that generate very high heat. This advanced coating exceeds the temperature limitations of conventional epoxies, phenolics and silicones, and can be used in applications as high as 2600F. Exceptional electrical properties are provided, including a volume resistivity of 10(9) ohm-cm and dielectric strength of 225 volts per mil at room temperature. Cerama-Dip is easily applied through dipping or conventional spray equipment, and cleans up prior to curing with warm water and soap.
For additional information, call (845) 268-0039, fax (845) 268-0041, e-mail firstname.lastname@example.org or visit http://www.aremco.com.