Ceramic Industry

Binks: Ceramic Fluid Regulator

May 11, 2004
The Binks 84-120 ceramic regulator provides a more uniform finish than has been previously possible in the ceramic finishing field. The regulator's unique design provides faster production and uniform finishes. It allows for controlled flow of material to the spray gun at the desired pressures, regardless of the location of the regulator on the line, and the material pressure is never affected by pressure surges from the pump. Regulation is controlled through the wing screw in the center of the unit and is monitored by a pressure gauge mounted at the outlet of the regulator.

For more information, call (630) 237-5000, fax (630) 237-5011 or visit http://www.binks.com.