NATIONAL BULK EQUIPMENT, INC.: Container Filling System
National Bulk Equipment, Inc. (NBE) has introduced a single-station, variable container filling system for bulk filling of drums, cartons, totes, gaylords, bulk bags and other bulk container types. The NBE variable container filling system provides dry bulk material processing operations for container-specific filling, densification, and NTEP-certified weighing.
The NBE variable container filling system has a proprietary densification design that integrates two densifying methods. This design reportedly enables varied container types to be processed through the same fill station. The design also ensures precise fill volume and weight accuracy, optimal line speed, and reduced material waste, while eliminating material contamination resulting from operator hand leveling of material.
When in the multiple-container mode, the filling system uses an automated, vibratory densifier pad to individually densify each drum on a pallet. The densifier arm and pad automatically extend from the unit to densify one drum at a time. When a drum fill/densification cycle is complete, the pallet deck rotates to repeat the cycle with each drum on the pallet. This one-by-one densification eliminates the problems common with rotating fillhead designs that vibrate the entire base of the unit, such as drums bouncing out of the unit and operators reaching into equipment during densification to stabilize drums.
When in the single-container mode, the filling system uses a deck-only vibratory densifier for large, single containers such as gaylords, totes, and bulk bags. The design isolates 3 Gs of vibration force to the deck of the system rather than vibrating the entire base of the unit. This isolated vibration concentrates the vibratory effect to the container enabling precise material fill volume and weigh accuracy. The isolated vibration also eliminates the damaging and transfer of vibration to surrounding equipment and work areas.
The NBE variable container filling system is designed with an integrated, NTEP-certified weigh system. A single, UL-listed, menu-driven controller meters material feed rates based on container type, material type, densification cycles, and finished package weight. The filling system can weigh containers with capacities from 250 to 4,000 lbs to an accuracy of ± .01%. The NBE NTEP-certified weigh system reportedly eliminates material waste common with manual designs. Operator interaction is limited to controller operation and container loading and unloading.
For more information, visit http://nbe-inc.com.