Sacmi’s Whitewares Division to Focus on Automation at Tecnargilla
Sacmi’s Whiteware Division is participating in Tecnargilla 2016.
Sacmi’s Whiteware Division is participating in Tecnargilla 2016, which will be held September 26-30 in Rimini, Italy, with a full range of robotic solutions for the production, glazing, and finishing of sanitaryware. Visitors will have the opportunity to discover these solutions at stand B1.
Sacmi’s sanitaryware division has, over the course of its history, reportedly delivered to the market more than 6,000 molds, 1,700 modelling developments, and more than 550 casting machines. One of these—a high-pressure casting cell consisting of four AVMs and a robot dedicated to automatic mold-on-mold gluing of the WC bowl with rim and tank—will be on display at the event. Reportedly offering benefits in terms of automation and quality, the single casting line and the total automation performed by robots ehnance the repeatability of the process. The solution has been checked and successfully tested with a primary company in the sector, with results that visitors to the fair can observe through a special screening of a video of the casting cell at work.
Visitors will see the new needleless glazing spray gun that has achieved success in the market (110 systems delivered recently), reportedly thanks to the elimination of the need for maintenance (no parts are subject to wear) and, as a direct consequence, the increasing repeatability of the process. More compact than traditional solutions, the new glazing gun allows inaccessible areas of the product to be reached, with consistent performance over time and optimization of the quantity of glaze delivered (reduction of overspray). The result is optimized costs and improved quality of the finished product.
For more information, visit www.sacmi.com.